WORLD LEADER IN
MADE-TO-MEASURE EQUIPMENT FOR THE RACING DRIVER FROM HEAD TO TOE...

Home > HANS^® > HANS^® fitting

HANS^® fitting

Download the product datasheet

Feel free to contact your Stand 21 technical
advisor if you encounter any problems...

Your HANS^® System must be
positioned between your shoulders
and your harnesses. Don’t ever put
anything between your harnesses
and your HANS^® System. Harnesses
fasteners must be positioned on
the HANS^® System lower-part.


	HANS^® Harness Fastener Padding

Your harnesses upper-fasteners must be correctly positioned to ensure
you maximum efficiency with the HANS^® System. Follow these
instructions carefully.

Position of the harnesses
upper-fasteners

INCORRECT

Minimize this length

^{Harnesses belts might slip off
the HANS^® System}

INCORRECT

1- Horizontal 2- 10° to 20° below the horizontal

3- Too low assembly
Belts are not fulfilling their function.
There is too much pressure on the driver’ shoulders.

4- Too high assembly
Wrong position of the HANS^® System
and risk of contacts with the helmet

To modify in any ways your HANS^® System (such as cutting it) would
make it automatically lose its FIA homologation and could make it
become dangerous!

The FIA has issued a new standard for the Frontal Head Restraints:
FIA 8858-2010. However, the FIA standard 8858-2002 remains
valid for competitions under FIA rules.

Search

HANS® fitting

HANS^® fitting